Innofill3D: Sponsorship

For our robot we’ll need to print a lot of prototypes to get things right the way we want for this we teamed up with Innofil3d and they and they send us 3 rolls of their ASA Natural filament. So now we’ll have enough filament to to prototype as much as we want and be able to print as much as possible of our 3d printed frame.

Be sure to check out their products:

E3D: sponsorship

For our robot we’ll need some kind of reduction gears or pulleys that we’ll 3D print. These 3D printed parts will need to handle a lot of mechanical stress and be able to withstand higher temperatures. For these requirements E3D sells a few “exotic” filaments with carbon fiber mixed in which should be able to withstand the higher temperatures and mechanical stress. E3D wanted to support us for our competition by sending us 2 different rolls of carbon filament. One of them is COLORFABB_XT-CF20 and the other one is PA_CF low warp also from colorfabb. Thank you E3D to support us!

Make sure to check out their site: